Products

TE1700C MULTIFUNCTION MEASUREMENT FOR RESISTANCE WELDERS

MULTIFUNCTION MEASUREMENTS FOR RESISTANCE WELDERS

TE1700C MULTIFUNCTION MEASUREMENT FOR RESISTANCE WELDERS

The TE1700C "WELD TESTER" is a portable instrument purposely designed for measuring the resistance welding parameters. By using different kind of probes, the same instrument enables to measure the welding current, the force at the electrodes, the voltage at the electrodes, the energy, the resistance and the thermal current. The analyzer can be set through the 5.7" color LCD touch screen, an indispensable high performing diagnostic tool which provides a graphical display of the waveforms of the selected signals.
Suitable for measuring current of AC, DC / MFDC and CDW machines.

 

 MAIN FUNCTIONS

  • Current measurements: RMS value, positive peak and negative peak.
  • Measure of the conduction angle in degrees for AC machines.
  • Measurement of the welding time in cycles with a 1/2 cycle resolution or in ms with a 0.1 ms resolution; maximum time of measurement 6 seconds.
  • Voltage measurements: RMS value, positive peak and negative peak.
  • Measurement of the delivered energy during the welding and of the electrical resistance value of the material.
  • Initial and final blanking function of with programmable duration to mask the slope of the welding current.
  • Management of the pulsations up to a maximum of 9.
  • Measurement of welding force: it displays the maximum and minimum average force values at the beginning and at the end of the welding time.
  • Blanking function, eliminates the measurement errors due to a high impact strength and allows its analysis.
  • Storage of measurements (30.000 max), statistical analysis and the details of the last 100 measurements available directly on the instrument.
  • Management of 16 different limit masks retrieved trough external inputs, the result of the limit evaluation is available through an exit to the outside (WELD MONITOR).
  • Limits on the measurement selectable between time, current, power and strength.
  • Ethernet and Wi-Fi interfaces for the instrument configuration and for the measurements visualization through smartphone/tablet or PC.
  • USB 2.0 output for memory stick use for storing data and waveforms (bitmap and csv formats).
  • Integrated clock to document each measurement with date and time of execution.
  • Integrated weld tables accessible through the touch screen display.
  • Wide range of measure transducers.
  • Automatic recognition of the connected transducers.
  • Powered by rechargeable Ni-Mh batteries and supplied with the power set. Battery life of approximately 10 h depending on usage.
  • Firmware update via memory stick.
  • Carrying suitcase for instrument and accessories.
credit by Deltacommerce