The TE700 is a very versatile Tecna welding control unit as it may be adjusted to different types of welders; in addition to the spot welders and the projections welders, it can also be installed on roller welders.

Moreover, it may work with constant current regulation, fix, constant power, constant voltage and constant energy adjustement and in dynamic mode.

The number of inlets and outlets may be increased to better adjust the welding control unit to automatic machines.

The control unit is able to manage up to a maximum of 4 different welding transformers.

It is possible to store up to 300 different welding programs.

Each program may be identified by an alphanumeric identification so to easily track it down.

Each program consists of several programmable parameters that describes the working cycle.

In addition to the plain 4-stage welding cycle, the control unit allows the running of welding processes with pre-welding current, post-welding current, slope and pulses.


Simplified programming via 6 keys and a backlit alphanumeric LCD.

Inverter command with IGBT at medium, allowing choosing the inverter working frequency between 1000Hz and 4000Hz.

Storage of 300 welding programs.

Each welding program may be given an 8-character alphanumeric identification.

Possibility of managing up to a maximum of 4 different welding transformers or up to a maximum of 4 different electrodes typologies through the same control unit.

Thermal protection for the welding transformer.

Up to 32 programmable parameters for each program.

Slope, pulses, pre-weld, post-weld functions and adjustment of the welding times with 1 ms resolution.

Display of the RMS welding current, energy, power, RMS electrodes voltage, original and final resistance, machine thermal use percentage measurements and, optionally, of the original thickness of the welded material and of the indentation at the end of the welding process.

6 operating modes: FIX, constant current, constant power, constant voltage, constant energy, DYNAMIC mode.

Limits relevant to: the welding current, electrodes voltage, energy, power, inverter use percentage, original and final resistance of the material to be welded; limit on the thickness and on the material indentation (optional).

Double stroke function Stepper function to compensate the electrodes wear with programmable curves.

Possibility of independently intervening on welding time and current through differentiated stepper laws.

Possibility of using 4 different stepper laws associated to 4 different spot counters which may be freely associated to each welding program.

Single and automatic cycle. WELD and NO-WELD function.

Control of 5 solenoid valves 24Vdc max. 5W with self-protected output.

Self-adjustment at mains frequency 50/60Hz.

Serial data transmission by means of optional insulated RS232 port.

Output for proportional solenoid valve.

Key for selecting foot control or two-hand control.

Selectable languages: Italian, English, French, German, Spanish, Hungarian, Swedish or Portuguese.

Possibility of upgrading the control unit Firmware via appropriate software.

Activation and control of the electrodes dressing.

Possibility of managing up to a maximum of 4 different simultaneous electrodes dressings through 4 different spot counters (optional).


We and selected third parties use cookies or similar technologies for technical purposes and, with your consent, also for other purposes as specified in the cookie policy.
If you close this banner with a tick or click on "Decline", only technical cookies will be used. If you want to select the cookies to be installed, click on 'Customise'. If you prefer, you can consent to the use of all cookies, including cookies other than technical cookies, by clicking on "Accept all". You can change your choice at any time.