A.T.S. is pleased to present the Fasteners 824 hydraulic press, equipped with a self clinching system. In this article you will find the technical specifications of this press listed, but we will continue with order.
Before we go into the technical specifications of the Fasteners 824 hydraulic press, it is a good idea to specify how a hydraulic press works. The operation of the hydraulic press is based on Pascal's law and it could be said that the principle is the same as the hydraulic system. The system usually consists of two cylinders and the fluid which, as a result, is poured into the smaller diameter cylinder, known to most as the "slave" cylinder.
This phase is followed by the moment in which the piston of the slave cylinder is pushed so that it can compress the fluid flowing through the tube in the larger cylinder, which has the name of main cylinder.
The pressure, exerted on the largest cylinder, causes the latter, through the piston present in it, to push back the fluid of the original cylinder. In this way the force applied on the fluids of the smaller cylinder produces more energy than when it is pushed into the main cylinder. This is why the hydraulic press is used in those contexts, almost always industrial ones, where it is essential to have a great pressure available.
A.T.S. 824 HYDRAULIC FASTENERS PRESS
The Fasteners 824 press, purchasable from A.T.S., is designed for the insertion of self-clinching pins, self-clinching nuts type S or CLS and spacer standoff. As far as the insertion systems of the self clinching inserts are concerned, as mentioned in the upper paragraph, they are based on hydraulics and there is also the possibility of equipping the press with an automatic feeding system for standard self clinching inserts.
There are several advantages of this type of hydraulic press, see the 3 main ones:
Safety: the possibility of modifying the distance between the punch and the mould as well as an anti-crushing hand system make this machine extremely safe, thus safeguarding the operator's safety, Superior versatility: the moulds, due to their conformation, allow the installation of inserts very close to the edges and close to the folds of metal artefacts, Power: 3.75 kW three-phase 380V.
The Fasteners 824 press stands out for its ability to generate a maximum force of 76kN with precision pressure repetition set by ±1%, a recess depth of 600mm and a hand crushing protection system.
AUTOMATIC LOADER AVAILABLE
Although the Fasteners 824 press is also available without the automatic loader function, it finds its strength in this function. In fact, thanks to the automatic loader, the operator's work is drastically reduced by speeding up the entire process. In addition, at the customer's request, it will be possible to install a laser pointer or the support surface with height-adjustable brushes.
Contact A.T.S. for further information or to request the technical data sheet of the press.