TECNA inverter mobile spot welders (3660E-tech e 3670E-tech)
For high-quality welding in both bodywork and industrial sectors
The TECNA inverter welders on trolley (3660E-tech and 3670E-tech) are systems designed for resistance welding in end-of-line installations. Their compact and mobile structure makes them particularly suitable for high-productivity industrial environments, while ensuring high welding quality.
The unit integrates the TE760 welding control, derived from the industrial sector, with simplified programming through 9 keys and a backlit graphic display. This system allows the management of up to 150 welding programs, 4 of which can be recalled externally, and 15 programmable parameters for each program. Advanced functions such as current rise/fall, pulses, pre- and post-weld, time adjustment with 1 ms resolution, and display of welding current RMS and machine utilization percentage are available.
The medium-frequency IGBT inverter control offers two operating modes: constant current and FIX. Current limits, inverter usage monitoring and an incremental function to compensate for electrode wear using programmable curves are included. Also available are single cycle with WELD/NON WELD function, automatic mains frequency adjustment (50/60 Hz), USB communication and firmware update capability.
The welding system features integrated cooling and uses clamps connected to the machine via 2400 mm extra-flexible cooled cables. As standard, it comes with a fully cooled “C” clamp capable of generating a force of 450 daN at 8 bar.
On request, the TECNA mobile welders can be configured with alternative clamps, including:
- “X” clamp model (8677/ES), fully cooled, with a force of 240 daN at 8 bar
- “X” clamp model (8678/S), fully cooled, with a force of 610 daN at 6 bar
- single-point clamp model (8351), also fully cooled.
The functionalities are completed by the ability to graphically display welding time and current on the screen and consult pre-set welding tables.
Case Studies on This Product
TECNA 3670E: Restoring Electrode Cooling Performance
The electrode cooling system on a TECNA 3670E - CF00 mobile spot welder, used in the production of industrial shelving, was no longer operating correctly.Before carrying out any maintenance work, an A.T.S. specialist technician inspected the cooling circuit to identify the cause of the problem.An initial compressed-air test confirmed that air could pass through the pipework. The inspection then focused on the water tank and the condition of the cooling fluid, revealing heavily contaminated water with visible sludge deposits.The technician thoroughly cleaned the tank and flushed the cooling lines, repeating the process until the discharged water ran clear.After approximately 2 hours of maintenance, the electrode cooling system was operating correctly again.This case study describes a specific repair carried out on a TECNA 3670E - CF00. Cooling failures can have different causes, so each machine requires its own technical assessment.
Read more
Request information about this product
Leave us your details: we will get back to you as soon as possible with all the information about this product.