Hexagonal closed-end blind rivet nut
Hexagonal body rivet nuts closed-end
Closed-end hexagonal blind rivet nuts in steel, available with M4–M10 internal threads and flat or reduced heads for threaded fixings in sheet metal.
Closed-end hexagonal blind rivet nuts combine two features in a single fastener: a hexagonal body designed to resist rotation and a closed end that prevents fluid from passing directly through the base of the insert.
They are used to introduce threaded fixing points into thin sheet metal and fabricated components where there is insufficient material thickness for a conventional tapped thread. Installation requires access from one side only, making these fasteners suitable for enclosed sections and assemblies where the rear surface cannot be reached.
The hexagonal shank fits into a matching hole, allowing its flat faces to engage with the surrounding metal. This helps prevent the rivet nut from turning as screws are tightened or removed.
A.T.S. supplies closed-end hexagonal blind rivet nuts in steel, with M4–M10 internal threads and a choice of flat or reduced heads.
Flat Head and Reduced Head Options
Head selection depends on how the fixing must sit against the sheet and the clearance available around adjoining components.
- Flat head: provides a bearing surface against the sheet and is suitable where the head can remain raised above the material.
- Reduced head: has a thinner profile, helping to minimise projection on the installation side.
Both versions retain the mechanical anti-rotation effect of the hexagonal body and the protection provided by the closed end.
Hole dimensions, grip ranges and available thread sizes should be confirmed against the technical specification of the selected fastener.
Installing Closed-End Hexagonal Rivet Nuts
A correctly sized hexagonal hole must be prepared before installation. The rivet nut is then fitted using a compatible blind rivet nut setting tool, which may be pneumatically or hydropneumatically operated.
The tool applies an axial pulling force through the internal thread, causing the designated section of the fastener to deform behind the sheet. The material is clamped between the head and the deformed section of the rivet nut.
At the same time, the flat faces of the hexagonal body engage with the hole to resist turning.
This process creates a threaded fixing without welding or tapping the sheet metal. It can also be completed from the accessible side of the component.
Correct hole preparation, material thickness and setting parameters are essential for a consistent installation.
Anti-Rotation Performance and Fluid Protection
Closed-end hexagonal rivet nuts can be considered for metal enclosures, machinery panels, fabricated housings and industrial assemblies where a threaded fixing must resist turning and where moisture or liquids may be present.
Compared with a smooth cylindrical rivet nut, the hexagonal shank provides mechanical resistance to rotation through its engagement with the matching hole. Unlike an open-ended hexagonal insert, the closed base also blocks the direct passage of fluid through the fastener body.
However, a closed-end rivet nut does not automatically make the complete joint watertight. Fluid may still pass between the insert and the surrounding sheet metal.
Applications requiring a specified level of sealing may need additional gaskets or sealing arrangements, together with appropriate testing of the finished assembly.
Product Selection and Technical Support
Choosing the correct closed-end hexagonal blind rivet nut involves checking the thread size, sheet thickness, hole dimensions, head clearance and operating conditions.
A.T.S. supplies closed-end hexagonal rivet nuts and compatible installation equipment, supporting manufacturers in selecting suitable fastening solutions for industrial sheet metal assemblies.
Dimensions, grip ranges and available configurations can be found in the threaded inserts technical datasheet.
Request information about this product
Leave us your details: we will get back to you as soon as possible with all the information about this product.